Tiling - Ceramics and Stone
Filter by type
Planicrete SP is an additive used for the preparation of high performance mortars.
Isolastic is a latex additive to impart elasticity to cement based tile adhesives.
Kerabond Plus is cementitious adhesive (C) improved (2) slip resistant (T) of Class C2T.
Keraflex Maxi S1 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E)
TPA 201M is a cost effective, pre-mixed, white, flexible tile adhesive, suitable for most internal thin bed
TPA 301R is a cost effective, flexible, powdered adhesive for wall and floor applications. Suitable to use over
TPA 401M is an off-white, flexible, powdered adhesive for wall and floor applications. It has superior
TPA 501R is a cost effective, high coverage, flexible, powdered adhesive for wall and floor applications.
TPA Lite is a premium grade, white, fibre reinforced, flexible cement based tile adhesive,
Ultralite S1 is a one-component, high-performance, flexible, lightweight, cementitious adhesive
Ultralite S2 is a high-performance, highly deformable, lightweight cementitious adhesive
WPA 1500 is a next generation, high performancedecoupling and waterproofing sheet
Kerapoxy Adhesive is a two-component, epoxy adhesive with no vertical slip for ceramic tiles and stone material.
Kerapoxy Cleaner is a detergent used to remove traces of epoxy grout such as Kerapoxy, Kerapoxy P,
Kerapoxy Design, etc.
Kerapoxy is a two-component acid-resistant epoxy grout (available in 15 colours) for joints of at least 3mm.
Kerapoxy Cleaner is a detergent used to remove traces of epoxy grout such as Kerapoxy
High-performance, anti efflorescence, non irritating quick-setting and drying polymer-modified mortar
TPA Tru Colour Grout is a high-performance stain & efflorescence resistant grout. It is designed
TPA Tru White Superfine Grout is a premium grade,unsanded, smooth, bright white
The TPA Levelling System takes the guesswork out of laying large format, heavy and low thickness
Topcem Pronto Slurry has been specifically designed to be applied prior to the installation
Topcem Pronto is a ready-to-use, normal setting, quick-drying mortar with high thermal conductivity.
Mapecem Pronto is a pre-blended, ready-to-use, quick-setting and drying (24 hours),
Mapecem is to be mixed with Planicrete SP, then it is to be applied to the substrate as a bonding slurry prior to the placement of the Mapecem Pronto engineered screed.
Filter by type
Planicrete SP is an additive used for the preparation of high performance mortars.
Isolastic is a latex additive to impart elasticity to cement based tile adhesives.
Kerabond Plus is cementitious adhesive (C) improved (2) slip resistant (T) of Class C2T.
Keraflex Maxi S1 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E)
TPA 201M is a cost effective, pre-mixed, white, flexible tile adhesive, suitable for most internal thin bed
TPA 301R is a cost effective, flexible, powdered adhesive for wall and floor applications. Suitable to use over
TPA 401M is an off-white, flexible, powdered adhesive for wall and floor applications. It has superior
TPA 501R is a cost effective, high coverage, flexible, powdered adhesive for wall and floor applications.
TPA Lite is a premium grade, white, fibre reinforced, flexible cement based tile adhesive,
Ultralite S1 is a one-component, high-performance, flexible, lightweight, cementitious adhesive
Ultralite S2 is a high-performance, highly deformable, lightweight cementitious adhesive
WPA 1500 is a next generation, high performancedecoupling and waterproofing sheet
Kerapoxy Adhesive is a two-component, epoxy adhesive with no vertical slip for ceramic tiles and stone material.
Kerapoxy Cleaner is a detergent used to remove traces of epoxy grout such as Kerapoxy, Kerapoxy P,
Kerapoxy Design, etc.
Kerapoxy is a two-component acid-resistant epoxy grout (available in 15 colours) for joints of at least 3mm.
Kerapoxy Cleaner is a detergent used to remove traces of epoxy grout such as Kerapoxy
High-performance, anti efflorescence, non irritating quick-setting and drying polymer-modified mortar
TPA Tru Colour Grout is a high-performance stain & efflorescence resistant grout. It is designed
TPA Tru White Superfine Grout is a premium grade,unsanded, smooth, bright white
The TPA Levelling System takes the guesswork out of laying large format, heavy and low thickness
Topcem Pronto Slurry has been specifically designed to be applied prior to the installation
Topcem Pronto is a ready-to-use, normal setting, quick-drying mortar with high thermal conductivity.
Mapecem Pronto is a pre-blended, ready-to-use, quick-setting and drying (24 hours),
Mapecem is to be mixed with Planicrete SP, then it is to be applied to the substrate as a bonding slurry prior to the placement of the Mapecem Pronto engineered screed.
Do you need assistance?
Products within Allduro’s range have been used on thousands of projects throughout Western Australia, from large scale multi living projects to commercial spaces, from the private dwelling’s through to the protection of local, state and federal Government Assets. Should you require any additional assistance or information, click on the Contact Us button below to direct your enquiry.
Related Projects
Warehouse Joondalup
Soudal Mutlibond SMX25
Cirque Duet Apartments
Soprasun Plus 3 and Sopragum Garden
Warehouse Canning Vale
Bostik P795
LET’S TALK
Do you need assistance?
Vestibulum non sapien ex. Praesent maximus neque in lectus malesuada maximus. Sed et gravida urna, ut sodales nunc. In vulputate, urna ut porta finibus, libero dolor porta mi, non lacinia justo diam sit amet ligula.