Menu

Waterproofing

Membrane Re-enforcement

Product name

Description

Download Specs

WPA Elastoband

The WPA Elastoband is an innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement. Featuring the central "Flexible Zone" Elastoband can accommodate movement in longitudinal, lateral and transverse directions enabling high elongation, rupture resistance and up to 100% elastic recovery. Elastoband is easy to install and provides for considerable time saving efficiencies and durable properties over conventional bond breaking sealants and tapes.

External Membranes - Liquid Membranes

Product name

Description

Download Specs

Duroflex Tank

Duroflex Tank is a two-component acrylic modified cementitious coating that requires only on-site mixing to form the ideal product to waterproof and resurface concrete, masonry and most other construction materials. Duroflex Tank provides an effective barrier to waterborne salts and atmospheric gases. It Also provides a hard wearing, seamless waterproof membrane for roofs, tanks and concrete protection.

WPA 100

WPA 100 is a single component, fibre reinforced, rapid
drying, cementitious waterproofing membrane. It is based
on special cements, modified with polymers and selected
graded aggregates and special waterproofing additives to
produce a flexible waterproofing compound.
WPA 100 is suitable for both positive and negative side
waterproofing applications and is capable of with standing
significant strain.

WPA 200

WPA 200 is a highly flexible, two part, rapid drying, cementitious waterproofing membrane, specifically designed for use under ceramic and stone tile finishes in bathrooms, balconies, roofs and some swimming pools.

WPA 200 combines the fast drying and excellent adhesion characteristics of traditional two part membranes with the outstanding toughness, elongation and flexibility of next generation acrylic waterproofing membranes. It is formulated to be UV resistant and is suitable for light (maintenance) traffic.

WPA 230UV

WPA 230UV is an elastrometric, one part, fibre reinforced, water based polyurethane membrane, suitable for waterproofing shower recesses, bathrooms, laundries, decks balconies and rooftops.

WPA Tuffcote

WPA TuffCote is a hard wearing, slip resistant top coat for external floor surfaces. It is specifically designed to increase the slip and wear resistance of the WPA 230 UV and WPA 200 waterproofing systems, in applications subject to residential foot traffic, varying climactic conditions and permanent UV light exposure.

WPA TuffCote bonds exceptionally well to WPA 230 UV, WPA 200 and other suitably prepared surfaces, is resistant to fungi and algae growth and has excellent weather resistance.

WPA TuffCote can be used as a standalone surface coating on new or existing concrete surface to provide a fresh, rejuvenated and slip resistant finish.

Duromastic AC

DURO MASTIC™ AC is a waterproof and UV resistant liquid membrane used either for long-term waterproofing or as a decorative coating. It cures to form a flexible waterproof membrane or coating (by varying the thickness and number of coats) that is resistant to weathering, fungi and algae. Although the membrane is waterproof it allows the substrate to breathe, reducing the risk of blistering. DURO MASTIC™ AC has been used for over 20 years as a roof membrane and protective coating.

Duromastic BLW Anti Root

Duromastic BLW Anti Root is a liquid applied, latex modified bituminous elastomeric waterproofing membrane which, when fully cured, forms a permanently flexible waterproof lining to most building surfaces including reinforced concrete, block work, brick work and cement render.

Durosolar

DUROSOLAR is a scientifically formulated heat reflective roof, wall and façade coating system that keeps your in-house temperature cooler and also acts as a waterproofing membrane. DUROSOLAR works by reflecting more of the sun's radiations at the roof or wall surface than other coatings, and this translates into reduced heat flow to occupancy zones. The benefits are reduced electricity usage, less heat transfer into buildings, and lower energy demand for air conditioning. Reduced heat build up can also prolong the life of building materials beneath the coatings by reduced thermal cycling and slowing chemical ageing.

Gripset C-1P

High performance, one component, flexible polymer cementitious membrane designed for a range of positive and negative waterproofing applications. Based on unique polymer technology providing outstanding waterproofing and adhesion properties for long term sealing performance and durability

Gripset P39

Gripset P39 is a highly versatile, fibre enhanced membrane suitable for a wide range of under tile and exposed membrane applications. Developed using advanced hybrid polyurethane technology, Gripset P39 offers superior elastomeric and flexible properties while maintaining high tensile strength. With outstanding waterproofing properties and low water vapour transmission, P39 possesses the unique feature for withstanding early water ponding and permanently wet conditions without re-emulsification.

Gripset LS

Gripset LS Roof Coat is a durable, hard wearing roof membrane, designed for external floor surfaces on pitched or flat roofs, podiums and balcony areas. Suitable for use with other Gripset membranes for permanent exposure to varying climatic conditions, UV light and foot traffic.

Gripset RD

Gripset RD is an elastomeric acrylic membrane designed for use over exterior substrates for long term protection against UV degradation and harsh climatic conditions. Gripset RD is suitable for exposed areas, facades, parapets walls, graded light trafficable floors, box gutters and roof surfaces.

Mapelastic Smart

Two component, high flexibility cementitious mortar, for waterproofing concrete surfaces, balconies, terraces, basins and swimming pools. Can be applied by brush or with a roller

Plastimul

All purpose waterbased bituminious waterproofing emulsion

External Membranes - Sheet Membranes

Product name

Description

Download Specs

Antirock

The ANTIROCK waterproofing membrane is composed of a non-woven polyester reinforcement and SBS modified bitumen. Its underface is protected by a thermofusible plastic film and its top face is covered with mineral granules. The ANTIROCK membrane is designed to waterproof civil engineering structures. It must be installed by thermofusion on dry and clean surfaces previously primed with ANTIROCK PRIMER or ANTIROCK EMULSION PRIMER

Colphene ICF

COLPHENE ICF is a high quality selfadhesive waterproofing membrane composed of SBS modified bitumen and a tri-laminate woven polyethylene. The membrane is ideal for application on ICF formwork systems or extruded polystyrene substrates.

Colphene 2500

COLPHENE 2500 is a self-adhering membrane which is manufactured from a select blend of elastomeric SBS modified bitumen, combined with a high density cross-laminated HDPE carrier film. A silicone release film protects the self-adhesive side while the surface of the membrane is reinforced with the HDPE carrier film. COLPHENE 2500 membrane provides a durable, water-tight seal for the building envelope protecting substrates from water, vapour and gases infiltration including methane gas during the product lifecycle.

Colphene 3000

COLPHENE 3000 self adhesive membrane is specially designed for vertical and horizontal waterproofing of foundation walls, tunnels, plaza decks, parking decks and split slab construction.

Colphene BSW-UNI-NG

Colphene BSW-UNI-NG is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side waterproofing applications. The system is composed of a select
blend of high performance SBS modified bitumen combined with an ultra high strength
reinforcement and a specially formulated top surface.

Sopralene Flam 180

Sopralene Flam 180 is specially designed for vertical and horizontal waterproofing of foundation walls, tunnels, plaza decks, parking decks and roof applications as a waterproofing membrane in one or two layer applications

Sopralene Stick

Sopralene Stick base ply is composed of selected SBS modifi ed bitumen applied onto a non-woven polyester reinforcement with self-adhesive bitumen on the underside and a sanded topside surface. It is specially designed for vertical and horizontal waterproofing of foundation walls, tunnels, plaza decks, parking decks and roof applications as a waterproofing membrane in one or two layer applications

Soprasun

Soprasun membranes are APP modified bituminious membranes specially designed for vertical and horizontal waterproofing of foundation walls, tunnels, plaza decks, parking decks and roof applications in one or two layer applications. Available in 3mm and 4mm membrane where the 4mm membrane is coated with UV stable mineral chips.

Soprajoint

SOPRAJOINT is an expansion joint membrane composed of selected SBS modifi ed bitumen applied onto a polyester knitting reinforcement with a plastic burn-off fi lm on the underside along with a centered aluminum film to aid as a bond breaker to the building substrate. SOPRAJOINT is the underlying component of a two or three ply SBS membrane application at expansion joints that do not exceed two (2”) inches (51 mm) in width.

Internal Membranes

Product name

Description

Download Specs

WPA 200

WPA 200 is a highly flexible, two part, rapid drying, cementitious waterproofing membrane, specifically designed for use under ceramic and stone tile finishes in bathrooms, balconies, roofs and some swimming pools.

WPA 200 combines the fast drying and excellent adhesion characteristics of traditional two part membranes with the outstanding toughness, elongation and flexibility of next generation acrylic waterproofing membranes. It is formulated to be UV resistant and is suitable for light (maintenance) traffic.

WPA 400

WPA 400 is an elastomeric, fibre reinforced waterproofing membrane based on high performance polymer technology. Designed for a range of under tile waterproofing applications, WPA 400 offers excellent adhesion properties and outstanding low water vapour transmission properties. Fully compatible with polymer modified cement based tiles adhesives, screeds and renders. The unique formulation provides excellent work ability and film build.

WPA 500

WPA 500 is a waterborne flexible waterproofing membrane specifically designed for use under ceramic and stone tile finishes. The unique formulation provides excellent workability and film build.

Gripset 2P

Gripset 2P is a two component latex cementitious membrane designed for a range of waterproofing applications including wet areas, showers, podiums, terraces, balconies, immersed and subterranean areas.
Developed by advanced polymer technology, Gripset 2P possesses fast drying and high adhesion properties. Suitable for use over a range of substrates, Gripset 2P provides a unique durable membrane while maintaining flexible and permanent waterproofing properties. Outstanding bonding properties are achieved for the overlay of surface finishes including renders, screeds, and tile adhesives. Suitable for cool or humid environments to enable tiling after 24 hours.

Gripset 38FC

Gripset 38FC is a fast curing, Fibre Reinforced membrane designed for waterproofing wet areas under tiles. Fast turn around, one hour between coats tile after 4 hours.

Gripset GC-1

Gripset GC1 is an innovative sheet membrane system that provides high performance waterproof and vapour barrier protection in the built environment. Consisting of an impermeable tear resistant core layer with a fleece facing on each side of the sheet, the unique properties of the GC1 membrane enable it to form a fast and reliable waterproof tanking system in numerous applications, enabling surface finishes such as tiles, screeds and toppings to be applied immediately after the membrane system has been installed.

Gripset GC-2

Gripset GC2 is an innovative heavy duty sheet membrane system that provides high performance waterproof/vapour proof and decoupling properties for external wet areas, roofing and specialised applications. Consisting of fibre bonded fabric on the exposed face and heavy duty fibre backing on the rear face, GC2 forms a fast and highly durable waterproof system that allows surface toppings/finishes or Gripset trafficable coatings to be applied over immediately after the membrane system has been installed.

Primers

Product name

Description

Download Specs

WPA 160

WPA 160 is a specalised, solvent free primer, designed to enhance the adhesion of subsequently applied waterproofing membranes, adhesives, toppings and decorative finishes, over porous or non-porous substrates. The unique formulation ensures outstanding adhesion over difficult to bond surfaces and offers a safe and environmentally friendly alternative to traditional methods of etching and solvent based primers.

WPA 360

WPA 360 is a water based, low solids, fast drying primer for
wet area waterproofing using WPA 200, WPA 230UV, WPA
400, WPA 500 or WPA Rapid waterproofing membranes.
WPA 360 may also be used as a primer for Aftek levelling
compounds. The application of WPA 360 aids in providing a substrate with uniform absorption and enhances adhesion of subsequent coatings.

WPA 460

WPA 460 is a two component water based epoxy primer, used to seal concrete and masonry surfaces. WPA 460 cures to a water resistant coating with excellent adhesion to most common building substrates.

WPA 560

WPA 560 Moisture Seal is a two component, water-based epoxy, designed as a water and vapour proof coating under water proofing membranes, ceramic tile adhesives, leveling compounds and timber floors.

Elastocol 500

Elastocol 500 is a primer made with SBS modified bitumen, fast-evaporating solvents and adhesive enhancing additives. It is required to prime most surfaces such as concrete, metal and
gypsum board substrates in order to improve the adhesion of torch-applied waterproofing membranes.

Elastocol Stick

Elastocol Stick is a primer designed to enhance the adhesion of self-adhesive membranes on porous surfaces.

Gripset E60

Water based epoxy primer and protective coating against moisture penetration and rising damp. Can be used directly over damp mineral based surfaces and newly laid "green" concrete. Provides a compatible surface for applying membrane, adhesive and other decorative finishes directly over.

Gripset GP Primer

Multipurpose 2 in 1 primer and bonding agent. As a primer, Gripset GP enhances adhesion of Gripset membranes over porous surfaces. As a bonding agent, it improves adhesion, strength and waterproof properties of cement-based compounds.

Gripset OP Primer

Gripset OP is a solvent free primer specifically developed with adhesion enhancing properties on metals, non-porous, dense and smooth substrates. It is designed for use on both vertical and horizontal surfaces, achieving high adhesion without the need for etching or using solvents. Ideally suited for the application of Gripset membrane coatings, adhesives and mortars to enable ease of bond to difficult substrates.

Gripset P10

Gripset P10 is high performance one component compound that is designed to be applied over mineral surfaces such as screeds, concrete, masonry and general cementitious surfaces to prevent the rise or entry
of residual dampness and active moisture vapour into the built environment. Gripset P10 is a moisture curing solvent free polyurethane resin that dries to the moisture present in surrounding air and in surfaces
it is applied to. As a solvent free and odourless product, Gripset P10 will emit no dangerous toxins to the surrounding environment, ideally suited for internal or confined areas as a primer or protective coating.

Where to Find Allduro

14 Vulcan Road,Canning Vale WA 6155. View map
T: 08 9455 1658

E: info@allduro.com

Connect with us

Facebook Twitter Google+